Chris P.C. Support Forum - ChrisTV PVR - The PVR that TAKES control OVER your TV Card

Chris P.C. srl

Purchase

F.A.Q.

Download

Help

Members

Welcome Guest ( Log In \| Register )	Resend Validation Email

Chris P.C. Support Forum -> Chris P.C. Products -> ChrisTV PVR -> Tips & Tricks

Recording/encoding With Mp3, Does not work, crash on stop

Track this topic | Email this topic | Print this topic

eberon

Posted: Mar 16 2004, 05:09

Member

Group: Members
Posts: 17
Member No.: 443
Joined: 16-March 04

Hi!

ChrisTV 3.60 is now in a state that I can finally feel very interested in recording segments. The problem that I've had since 3.50 is that when I hit record with MP3 enabled, the record goes well, but when I stop the recording ChrisTV crashes with an error about lame.acm or a file very much like it. I would replicate this error to produce exact details, but when ChrisTV crashes, it is very difficult for me to get it to work with my TV tuner again.

I don't doubt that this isn't a problem with ChrisTV but is a problem with my system or the installed mp3 codec, but I am at a loss for a solution.

I attempted to search the forum for an answer, but I found no similar problems along the same line.

Thanks in advance for any response.

Chris

Posted: Mar 16 2004, 07:20

Chris P.C. Support Team

Group: Admin
Posts: 4114
Member No.: 2
Joined: 1-September 03

Try to install Fraunhofer MPEG Layer-3 codec (Full) from here : http://mpcodecs.narod.ru/ and follow the instalation instruction.

Best Regards,
ChrisPC Support

ChrisTV PVR - The PVR that TAKES control OVER your TV Card
http://www.chris-tv.com

ChrisPC Media Streamer - Broadcast your multimedia content over the internet simply by pressing a button
http://mediastreamer.chris-pc.com

ChrisTV Online! - Watch and RECORD more than 1800+ online TV channels - NO TV Card required.
http://online.chris-tv.com

eberon

Posted: Mar 16 2004, 14:11

Member

Group: Members
Posts: 17
Member No.: 443
Joined: 16-March 04

Thanks Chris! All good now

powertje

Posted: Jul 17 2004, 09:31

Newbie

Group: Members
Posts: 1
Member No.: 817
Joined: 13-July 04

i installed that codec also, but it doesn't show in de recording options.
Is there a special way to install ?

Chris

Posted: Jul 17 2004, 11:18

Chris P.C. Support Team

Group: Admin
Posts: 4114
Member No.: 2
Joined: 1-September 03

Please check http://www.chris-tv.com/faq.html#trial_limitations

vergnuegt

Posted: Nov 22 2007, 08:06

Newbie

Group: Members
Posts: 1
Member No.: 9340
Joined: 21-November 07

Hi, Chris,

I am a registered user and I have a few problems with the mp3 recordings from tv with windows vista and the registered Chris TV 5.10 (tuner: kworld plus - 713X analog Philips tuner with NO hardware encoding).

First I installed the Fraunhofer codec you recommended above. Unfortunately, it works not. I received the message, that this codec is only used with radium div-x. So I installed the Fraunhofer mp3 codec pro 1.263. This works with two diffenent bitrates: with the in the first time in the chris tv mp3 settings underlined bitrate 320/32 Kbits stereo and with 96 kbits - independent from the bitrate I choose (192kbit, 128kbit, …), the (tv and radio) recording always will be saved at 96 kbit.

I also used the lame acm 3.97, but I have the same problems. I get a lot of bitrates to choose - but the recordings were all saved at 96 kbit.

What can I do? Is it possible to get the lame_enc.dll for mp3 encoding – or is in planned? I would be glad If you can help me.

Thanks, Stefan

0 User(s) are reading this topic (0 Guests and 0 Anonymous Users)

0 Members:

« Next Oldest | Tips & Tricks | Next Newest »

[ Script Execution time: 0.0531 ] [ 16 queries used ] [ GZIP Enabled ]