Settings Digital Lcd Monitor

General Discussion about ChrisTV PVR Software
Post Reply
rother
Member
Posts: 4
https://ask.fm/kuchniewarszawa
Joined: 18 Dec 2003, 11:50

Post by rother »

help
i have just changed my crt to a digtal lcd monitor linked to a radeon ati card, the image quality is no so good with Christv has anyone any settings they could recommend.

many thanks
rother
User avatar
Chris
ChrisPC Support Team
Posts: 4949
Joined: 01 Sep 2003, 18:31
Location: ChrisPC HQ
Contact:

Post by Chris »

Check this topic : http://forum.chris-tv.com/index.php?showtopic=248

Also make sure you have the latest WHQL drivers for your Graphic Card :
- For NVidia Graphic Card Drivers visit this page : http://www.nvidia.com/content/drivers/drivers.asp
- For ATI Graphic Card Drivers visit this page : http://www.ati.com/support/driver.html
rother
Member
Posts: 4
Joined: 18 Dec 2003, 11:50

Post by rother »

thanks Chris
i started there but i have diagonal lines, these settings do not seem to remove them
User avatar
Chris
ChrisPC Support Team
Posts: 4949
Joined: 01 Sep 2003, 18:31
Location: ChrisPC HQ
Contact:

Post by Chris »

Does the LCD have also an analog input ? Do you have the same problem when using analog ?

Do you have the problem if you use the TV Card application ?

Attach your ChrisTV.log file.
User avatar
NOPIK
Advanced Member
Posts: 561
Joined: 02 Sep 2003, 18:30
Location: Moscow, Russia

Post by NOPIK »

Do you see competely black or white lines (may be, pink or green)?
rother
Member
Posts: 4
Joined: 18 Dec 2003, 11:50

Post by rother »

1. Yes it has an analogue input and the lines are not there when using it.
2. the lines are not coloured but the picture is slightly washed out interlaced with the diagonal lines, i have noticed that it is not as prominent on another station i am begining to wonder if it is something to do with the quality of my TV signal.
User avatar
Chris
ChrisPC Support Team
Posts: 4949
Joined: 01 Sep 2003, 18:31
Location: ChrisPC HQ
Contact:

Post by Chris »

rother @ Apr 4 2005, 11:44 wrote: 1. Yes it has an analogue input and the lines are not there when using it.
In this case it's not a ChrisTV setting problem.
Post Reply