Posted: 31 Oct 2007, 04:21
Information I have on it:
* Xceive XC3028 (tuner & analog IF demodulator)
* Samsung S5H1409 / Conexant CX24227 (digital demodulator)
* Conexant cx2388x (A/V Decoder & PCI bridge)
On a clean install of ChrisTV (Pro or Lite), it goes through the setup, detects the Conexant tuner drivers, and goes to the channel setup.
Sometimes it tells me it detects channels, but never displays or tunes anything if I try to go to those channels.
Conexant cx2388 Tuner, Audio, Video, etc are all listed in the setup for the program. It lists the tuner as "PAL_B" or something even when I keep setting it to the correct NTSC_M setting.
If I tell it to try alternative tuning methods, the program always locks when trying to detect or tune channels.
The KWorld PCI 120 has different hardware than the KWorld 115 and 110. I haven't found any info on getting this card to work with programs like DScaler or ChrisTV.
It works fine with programs like TheFlyDS (analog) and WatchHDTV (digital).
I've been a fan of ChrisTV for a while, and was hoping I could get it to work for analog support.
* Xceive XC3028 (tuner & analog IF demodulator)
* Samsung S5H1409 / Conexant CX24227 (digital demodulator)
* Conexant cx2388x (A/V Decoder & PCI bridge)
On a clean install of ChrisTV (Pro or Lite), it goes through the setup, detects the Conexant tuner drivers, and goes to the channel setup.
Sometimes it tells me it detects channels, but never displays or tunes anything if I try to go to those channels.
Conexant cx2388 Tuner, Audio, Video, etc are all listed in the setup for the program. It lists the tuner as "PAL_B" or something even when I keep setting it to the correct NTSC_M setting.
If I tell it to try alternative tuning methods, the program always locks when trying to detect or tune channels.
The KWorld PCI 120 has different hardware than the KWorld 115 and 110. I haven't found any info on getting this card to work with programs like DScaler or ChrisTV.
It works fine with programs like TheFlyDS (analog) and WatchHDTV (digital).
I've been a fan of ChrisTV for a while, and was hoping I could get it to work for analog support.