I have downloaded and installed Chris TV Lite 5.65 on Windows 7 Today.
No video audio coming on composite video.
I don't have any TV/ satellite card. I have Indian Doordarshan DD' Set Box connected to my dish. I send STB selection to my PC through TECH-COM USB TV tuner. I have selected Composite Video setting, and PAL B.
But some horizontal vertical colored lines are appearing. no clear audio video is appearing on Chris TV window. Sometimes the first frame appears on ChrisTV window, that was sent by STB/ TV tuner to PC, but that doesn't change or move.
With the same setting, it was running well in Total Media 3.0 and 3.5 that was supplied with my TV tuner and also on Honestech TVR 2.5 that I had downloaded from net.
how to make composite video/ audio appear on ChrisTV Lite.
Thanks.
--
Rawat
India
Video Audio Problem On Composite Video
-
- Member
- Posts: 6
- https://ask.fm/kuchniewarszawa
- Joined: 09 Sep 2012, 08:04
-
- Member
- Posts: 6
- Joined: 09 Sep 2012, 08:04
-
- Member
- Posts: 6
- Joined: 09 Sep 2012, 08:04
Problem partly solved.
I go to
Program Settings
Video rendering and improvement settings.
There I untick "Use OverLay mixer", and the video starts moving.
But when I close the probgram and restart, then it again is showing first still image.
Then again, I have to go and tick/ untick any of the 3 options in "Use OverLay mixer", VMP-9, EVR options, and it starts appearing. But always starting in still video.
What is the problem and solution, to make this stick. It can show correctly, but it goes unstuck on close down and restart.
Thanks.
--
RAwat
I go to
Program Settings
Video rendering and improvement settings.
There I untick "Use OverLay mixer", and the video starts moving.
But when I close the probgram and restart, then it again is showing first still image.
Then again, I have to go and tick/ untick any of the 3 options in "Use OverLay mixer", VMP-9, EVR options, and it starts appearing. But always starting in still video.
What is the problem and solution, to make this stick. It can show correctly, but it goes unstuck on close down and restart.
Thanks.
--
RAwat