Christweak - Vista 64 Support?

General Discussion about ChrisTWEAK Software
Post Reply
User avatar
Bilar Crais
Member
Posts: 6
https://ask.fm/kuchniewarszawa
Joined: 24 Mar 2007, 04:35

Post by Bilar Crais »

Edit:

Seems to be working now...
MSI K8T Neo2-F v2.0 | Murdock XMod 3.5 AGP/PCI Lock bios | Athlon 64 X2-M 3600+ | 2gb G.SKILL Dual Channel | Antec SLK3700-BQE |PVR-150 Retail (2) | BeyondTV v4.7.1 | BFG 7800GS OC | ATI RW | Philips SPD2413P DVD | Vista x64 Business 6.0.6001.18000 | (2) DMax 10 6L200SO SATA 7200rpm Striped
User avatar
Chris
ChrisPC Support Team
Posts: 4949
Joined: 01 Sep 2003, 18:31
Location: ChrisPC HQ
Contact:

Post by Chris »

Does it work correctly for both PVRs 150 and 250 ?
User avatar
Bilar Crais
Member
Posts: 6
Joined: 24 Mar 2007, 04:35

Post by Bilar Crais »

Chris @ Feb 10 2008, 20:30 wrote: Does it work correctly for both PVRs 150 and 250 ?



Chris - I was mistaken. I cannot get pre-filtering to work in Vista x64. The color control section does work - I can adjust sharpness, brightness, etc. There are no 64-bit Windows drivers for the PVR-250, and according to various sources, Hauppauge has no intention of releasing them. That's why I no longer use the '250 - only (2) PVR-150s.
At any rate - if you can look into full x64 support, I'd be most appreciative.

Best Regards,

Cary
MSI K8T Neo2-F v2.0 | Murdock XMod 3.5 AGP/PCI Lock bios | Athlon 64 X2-M 3600+ | 2gb G.SKILL Dual Channel | Antec SLK3700-BQE |PVR-150 Retail (2) | BeyondTV v4.7.1 | BFG 7800GS OC | ATI RW | Philips SPD2413P DVD | Vista x64 Business 6.0.6001.18000 | (2) DMax 10 6L200SO SATA 7200rpm Striped
User avatar
Bilar Crais
Member
Posts: 6
Joined: 24 Mar 2007, 04:35

Post by Bilar Crais »

Something else peculiar about x64 use: When you first install Christweak, clicking on either the application or the "about" applet causes an exception error. However, once you enter your registration information, no further errors are thrown.
MSI K8T Neo2-F v2.0 | Murdock XMod 3.5 AGP/PCI Lock bios | Athlon 64 X2-M 3600+ | 2gb G.SKILL Dual Channel | Antec SLK3700-BQE |PVR-150 Retail (2) | BeyondTV v4.7.1 | BFG 7800GS OC | ATI RW | Philips SPD2413P DVD | Vista x64 Business 6.0.6001.18000 | (2) DMax 10 6L200SO SATA 7200rpm Striped
bkch
Member
Posts: 5
Joined: 24 Aug 2008, 10:28

Post by bkch »

Hi, I've been trying to run this on Vista 64bit without any success - as soon as I run the program I get the "ChrisTWEAK 2.00 has stopped working" message.

Then when I click "close the program" I get a pop up that says:

"Exception EAccessViolation in module ChrisTWEAK.exe at 00086C56. Access violation at address 00486C56 in module 'ChrisTWEAK.exe'. Read of address 00000000B."

I'd *really* like to buy this program - any chance of getting some help getting it working???

Thanks very much.
User avatar
Chris
ChrisPC Support Team
Posts: 4949
Joined: 01 Sep 2003, 18:31
Location: ChrisPC HQ
Contact:

Post by Chris »

Please attach snapshots with the error messages.
bkch
Member
Posts: 5
Joined: 24 Aug 2008, 10:28

Post by bkch »

Thanks for the post Chris :)

See attached.
You do not have the required permissions to view the files attached to this post.
bkch
Member
Posts: 5
Joined: 24 Aug 2008, 10:28

Post by bkch »

Close up of first error.
You do not have the required permissions to view the files attached to this post.
bkch
Member
Posts: 5
Joined: 24 Aug 2008, 10:28

Post by bkch »

Nevermind. I've reverted to 32 bit. Thanks anyway.
acadodiurbuby
Newbie
Posts: 1
Joined: 07 Jun 2011, 13:12
Location: United Kingdom

Post by acadodiurbuby »

Seems It does not work for both those OS. I click on the BIG DVD button, open the xvid format, click on open. As soon as I click on the advanced button =nothing show up. I press altctrl delete and it says program is not responding. Any way around this for x64 bit userS?
Post Reply